For Furnace repair in Jackson MI, like us on Facebook!
For Boiler repair in Chelsea MI, visit us on Google!
For Geothermal repair in Albion MI, follow us on Twitter!
Aspen One Hour Heating & Air Conditioning has certified technicians to take care of your Furnace installation near Chelsea MI.
Always on Time…Or You Don′t Pay a Dime
Always on Time…Or You Don′t Pay a Dime
(517) 879-2049
See what makes Aspen One Hour Heating & Air Conditioning your number one choice for Boiler repair in Albion MI.
Always on Time…Or You Don′t Pay a Dime
Always on Time…Or You Don′t Pay a Dime

Thermostats and Control Systems

Thermostats and Control Systems

Thermostats and Control Systems

You can save money on your heating and cooling bills by simply resetting your thermostat when you are asleep or away from home. You can do this automatically without sacrificing comfort by installing an automatic setback or programmable thermostat.

Using a programmable thermostat, you can adjust the times you turn on the heating or air-conditioning according to a pre-set schedule. Programmable thermostats can store and repeat multiple daily settings (six or more temperature settings a day) that you can manually override without affecting the rest of the daily or weekly program.

GENERAL THERMOSTAT OPERATION

You can easily save energy in the winter by setting the thermostat to 68°F while you're awake and setting it lower while you're asleep or away from home. By turning your thermostat back 10° to 15° for 8 hours, you can save 5% to 15% a year on your heating bill -- a savings of as much as 1% for each degree if the setback period is eight hours long. The percentage of savings from setback is greater for buildings in milder climates than for those in more severe climates.

In the summer, you can follow the same strategy with central air conditioning by keeping your house warmer than normal when you are away, and lowering the thermostat setting to 78°F (26°C) only when you are at home and need cooling. Although thermostats can be adjusted manually, programmable thermostats will avoid any discomfort by returning temperatures to normal before you wake or return home.

A common misconception associated with thermostats is that a furnace works harder than normal to warm the space back to a comfortable temperature after the thermostat has been set back, resulting in little or no savings. In fact, as soon as your house drops below its normal temperature, it will lose energy to the surrounding environment more slowly. The lower the interior temperature, the slower the heat loss. So the longer your house remains at the lower temperature, the more energy you save, because your house has lost less energy than it would have at the higher temperature. The same concept applies to raising your thermostat setting in the summer -- a higher interior temperature will slow the flow of heat into your house, saving energy on air conditioning.

LIMITATIONS FOR HOMES WITH HEAT PUMPS, ELECTRIC RESISTANCE HEATING, STEAM HEAT, AND RADIANT FLOOR HEATING

Programmable thermostats are generally not recommended for heat pumps. In its cooling mode, a heat pump operates like an air conditioner, so turning up the thermostat (either manually or with a programmable thermostat) will save energy and money. But when a heat pump is in its heating mode, setting back its thermostat can cause the unit to operate inefficiently, thereby canceling out any savings achieved by lowering the temperature setting. Maintaining a moderate setting is the most cost-effective practice. Recently, however, some companies have begun selling specially designed programmable thermostats for heat pumps, which make setting back the thermostat cost-effective. These thermostats typically use special algorithms to minimize the use of backup electric resistance heat systems.

Electric resistance systems, such as electric baseboard heating, require thermostats capable of directly controlling 120-volt or 240-volt circuits. Only a few companies manufacture line-voltage programmable thermostats.

The slow response time -- up to several hours -- of steam heating and radiant floor heating systems leads some people to suggest that setback is inappropriate for these systems. However, some manufacturers now offer thermostats that track the performance of your heating system to determine when to turn it on in order to achieve comfortable temperatures at your programmed time.

Alternately, a normal programmable thermostat can be set to begin its cool down well before you leave or go to bed and return to its regular temperature two or three hours before you wake up or return home. This may require some guesswork at first, but with a little trial and error you can still save energy while maintaining a comfortable home.

CHOOSING AND PROGRAMMING A PROGRAMMABLE THERMOSTAT

Most programmable thermostats are either digital, electromechanical, or some mixture of the two. Digital thermostats offer the most features in terms of multiple setback settings, overrides, and adjustments for daylight savings time, but may be difficult for some people to program. Electromechanical systems often involve pegs or sliding bars and are relatively simple to program.

When programming your thermostat, consider when you normally go to sleep and wake up. If you prefer to sleep at a cooler temperature during the winter, you might want to start the temperature setback a bit ahead of the time you actually go to bed. Also consider the schedules of everyone in the household. If there is a time during the day when the house is unoccupied for four hours or more, it makes sense to adjust the temperature during those periods.

OTHER CONSIDERATIONS

The location of your thermostat can affect its performance and efficiency. Read the manufacturer's installation instructions to prevent "ghost readings" or unnecessary furnace or air conditioner cycling. To operate properly, a thermostat must be on an interior wall away from direct sunlight, drafts, doorways, skylights, and windows. It should be located where natural room air currents–warm air rising, cool air sinking–occur. Furniture will block natural air movement, so do not place pieces in front of or below your thermostat. Also make sure your thermostat is conveniently located for programming.


U.S. Department of Energy - Energy Efficiency and Renewable Energy

24 Hour Emergency Service (517) 879-2049 or Schedule Service Online
24 Hour Emergency Service
(517) 879-2049
Schedule Service Online
 
Contact Info
 
Address:  4131 W. Michigan Ave.
Jackson, MI 49202
Toll Free:  (888) 782-7736
Business Hours:
Monday - Friday: 8:00am - 5:00pm
24/7 Service  —  NO OVERTIME CHARGES!
Schedule an Appointment
Get an Estimate
 
Payment Options
 
For Furnace in Jackson MI, we accept most major credit cards.
 
We accept check for Boiler repair service provided in Chelsea MI.
We accept cash for Heating repair service provided in Albion MI.
 
Financing Options
Connect With Us:
For Furnace repair in Jackson MI, like us on Facebook!
For Boiler repair in Chelsea MI, visit us on Google!
For Geothermal repair in Albion MI, follow us on Twitter!
 
Send Us a Message
 
Check out our Geothermal repair service in Albion MI
Find out ways to save energy and money with Aspen One Hour Heating & Air Conditioning Geothermal repair service in Chelsea MI
Allow our techs to repair your Furnace in Jackson MI
Allow Aspen One Hour Heating & Air Conditioning to repair your Geothermal in Albion MI
Get your Furnace replacement done by Aspen One Hour Heating & Air Conditioning in Jackson MI
Aspen One Hour Heating & Air Conditioning, ready to service your Boiler in Albion MI
Call Aspen One Hour Heating & Air Conditioning for great Furnace repair service in Jackson MI
Trust our techs to service your Boiler in Chelsea MI
Email us any questions about our Boiler repair service in Albion MI
Join our maintenance plan for easy service for your Boiler unit in Jackson MI
Schedule a Geothermal repair service in Jackson MI
Trust your home comfort to us for your next Boiler in Chelsea MI
See what your neighbors are saying about our Furnace repair service in Chelsea MI
Leave the maintenance stress to our technicians on your next Geothermal service in Chelsea MI
We stand behind our Heating company's work in Chelsea MI.
Save money on your next Boiler installation in Albion MI.
When we service your Furnace in Albion MI, your satifaction means the world to us.
Read our Boiler repair service's testimonials in Jackson MI.
We offer 24/7 emergency Boiler repair service in Albion MI.
To schedule your Geothermal installation in Chelsea MI, just email us!
Want to be a Furnace repair service technician in Jackson MI? - Call us.
Sign up for our Boiler maintenace plan in Jackson MI to ensure your home stays comfortable.
We service most Boiler brands and models near Chelsea MI.
For Furnace in Jackson MI, we accept most major credit cards.
We accept cash for Heating repair service provided in Albion MI.
We accept check for Boiler repair service provided in Chelsea MI.
For information on Furnace installation near Albion MI, email Aspen One Hour Heating & Air Conditioning.
Improve your indoor air quality in Albion MI by having a clean Boiler.
We specialize in Boiler service in Jackson MI so call Aspen One Hour Heating & Air Conditioning.
We excel in Furnace repair in Jackson MI
Let us do your Air Conditioner repair service in Jackson MI.
Join our maintenance plan for easy service for your Boiler unit in Jackson MI
Trust your home comfort to us for your next Boiler in Albion MI
See what your neighbors are saying about our Furnace repair service in Chelsea MI
Leave the maintenance stress to our technicians on your next Geothermal service in Chelsea MI
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Maintenance   |   Guarantees   |   Employment   |   E Store   |   Search Site
Home   |   Email Us   |   Schedule Service
Get a Quote   |   Maintenance   |   Guarantees
Employment   |   E Store   |   Search Site
Google Map of Aspen One Hour Heating & Air Conditioning
Click to view full map